|
|
|
|
CornerStone ANSI 107 Class 3 Mesh Long Sleeve Tee. This breathable, moisture-wicking mesh tee delivers the highest ANSI visibility with additional reflective tape to meet ANSI 107 Class 3 standards. 4.1-ounce, 100% polyester birdseye mesh Durable, reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body and sleeves 1x1 rib knit neck Back neck tape Left chest pocket 1x1 rib knit cuffs
CS203
Preferred1
CornerStone ANSI 107 Class 3 Mesh Tee. This breathable, moisture-wicking mesh tee delivers the highest ANSI visibility with additional reflective tape to meet ANSI 107 Class 3 standards. 4.1-ounce, 100% polyester birdseye mesh Durable, reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body and sleeves 1x1 rib knit neck Back neck tape Left chest pocket
CS202
Preferred1
CornerStone ANSI 107 Class 3 Waterproof Ripstop 3-In-1 Parka 100% polyester 300-denier ripstop shell with durable water-repellent (DWR) finish 100% polyester lining Black bottom front and lower sleeves for a cleaner appearance Shell's fabric waterproof rating: 5000MM Fully seam-sealed shell Adjustable rain hood Durable, reflective 2-inch tape meets ANSI 107 requirements Full-length interior and exterior storm flaps Vented cape back Right chest pocket and retractable ID holder Two lower front pockets Center front zippered pocket to hold a tablet Gusseted cuffs Elastic hem Decoration access pocket in shell Non-ANSI, 8.6-ounce, 100% polyester inner full-zip hoodie Hoodie can be attached inside shell This garment must be fully zipped to be in compliance with ANSI 107 standards
CSJ502
Preferred1
ANSI Class 3 Hi Viz Safety Parka. A whole new level in high visibility outerwear combining comfort, cold weather protection, rugged durability and plenty of pockets! Constructed with a durable 300D waterproof polyester outer shell with fully taped seams. Warm quilted lining with a comfortable fleece finish. Durable YKK main zipper. Full length storm flap, inner rib knit cuffs and detachable lined hood all help to keep the cold out. Mic tabs on left and right chest, Outer right chest cell phone pocket, zip pocket on the left sleeve, pen/pencil slots on the right sleeve, left and right inner pockets. Two lower hand warmer pockets and covered cargo pockets. Meets ANSI/ISEA 107-2015 Class 3 requirements.
MAX628
Preferred1
CornerStone ANSI 107 Class 3 Long Sleeve Segmented Tape Hooded Tee 4.1-ounce, 100% polyester birdseye mesh UPF rating of 30 Hat- and helmet-compatible 3-panel hood Segmented, durable, reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body and easy movement Rib knit cuffs
CS208
Preferred1
CornerStone ANSI 107 Class 2 Segmented Tape Tee This breathable, moisture-wicking mesh tee delivers high visibility and comfort in Class 2 environments. 4.1-ounce, 100% polyester birdseye mesh 1x1 rib knit neck Back neck tape Segmented, durable, reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body and easy movement Left chest pocket
CS204
Preferred1
ANSI Class 3 Hi Viz Safety Bomber Jacket with Black Bottom and Removable Fleece Liner. Featuring waterproof coated heavy 300D nylon shell with fully taped seams. Includes a warm polar fleece removable liner. Additional features include concealed detachable hood, mic tabs on left and right shoulders, inside left zip pocket with separate cell phone pocket, right inside pocket with velcro closure, outer cell phone pocket and lower side hand warmer pockets lined with fleece for added warmth. Includes durable YKK main zipper, reinforced shoulder and arm seams and sewn on reflective taping for long lasting durability.
MAX605
Preferred1
CornerStone ANSI 107 Class 2 Mesh Tee. This breathable, moisture-wicking mesh tee delivers high visibility and on-the-job comfort. 4.1-ounce, 100% polyester birdseye mesh UPF rating of 30 Durable, reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body 1x1 rib knit neck Back neck tape Left chest pocket
CS200
Preferred1
CornerStone ANSI 107 Class 2 Mesh Long Sleeve Tee. This breathable, moisture-wicking mesh tee delivers high visibility and on-the-job comfort. 4.1-ounce, 100% polyester birdseye mesh UPF rating of 30 Durable, reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body 1x1 rib knit neck Back neck tape Left chest pocket 1x1 rib knit cuffs
CS201
Preferred1
ANSI 107, Type O Class 1 CSA Z96, Class 1 Water repellent shell treatment Lined with 10 oz. Fleece with a laminated 4 oz Grid Fleece material that traps warm air to help retain heat, transports moisture away from body to stay dry, and provides warmth without bulk 2" two-tone reflective tape for optimum visibility Zipper closure Removable Hood Stand up collar Front hand warmer pockets 1 left zippered chest pocket
HV59
Preferred2
Breathable polyester mesh 2" black two-tone tape for optimum visibility All-around black reflective trim for added visibility and safety Zipper closure D-ring access Mic tabs with reinforced stitching Padded neck for comfort when vest is loaded down with tools Grommets at neck for tool keepers/lanyards I.D. pocket and radio/cell pocket 2 internal pockets 1 chest pocket with 4 pen pockets on left chest 1 tablet pocket 2 lower pockets 1 large back pocket with snap closure ANSI 107, Type 1 Class O
HV15
Preferred2
ANSI/ISEA 107 Class 3 2-in-1 bomber jacket. Constructed with a durable waterproof polyester outer shell with taped seams and a removable black fleece liner. Including a black knit waist band and cuffs, Adjustable hideaway hood, black collar 2' silver reflective tape, 2 mic tabs and 5 pockets with radio and pen pockets. Available sizing: M, L, 2X, 3X, 4X and 5X
HV43
Preferred2
High-density polyethylene (HDPE) shell with full brim to protect against sun exposure, rain, snow and dust. Unique '3D Adjustment' provides a precise helmet fit using harness depth settings. Evolution Wheel Ratchet is easy to use and creates a firm comfortable fit. 6-Point Suspension System Universal slots to fit various accessories Packed ready-to-wear with no assembly required Meets ANSI/ISEA Z89.1-2009, Type 1, Class E requirements Meets ANSI requirement for Reverse Donning and Lower Temperature
HH18HV
Preferred2
100% Polyester Birdseye Mesh Durable lightweight performance wicking fabric Breathable & flexible segmented reflective tape Black bottom helps hide dirt 1 upper left chest pocket ANSI 107, Type R Class 3
HV63
Preferred2
ANSI/ISEA 107 Class 2 vest Made with a breathable, breakaway Polyester mesh for maximum cool comfort and additional safety around moving machinery or equipment. Featuring 2' silver reflective tape for better visibility, a hook-and-loop closure, 2 internal lower pocket and 1 external chest pocket with 1 pen pocket. Sizing from Medium to 5X.
HV07
Preferred2
ANSI/ISEA 107 Class 2 vest Constructed out of a durable solid polyester The breakaway feature provides additional safety around extreme traffic hazards, moving machinery or equipment. Featuring 2' silver reflective tape for better visibility, hook and loop closure 2 internal lower pocket and 1 external chest pocket with 1 pen pocket. Sizing from Medium to 5X.
HV06
Preferred2
ANSI/ISEA 107 Class 2 vest Can be used by survey crews, railway workers, school crossing guard and much more. Constructed out of a breathable polyester mesh. Featuring hook and loop closures, 2' silver reflective tape for better visibility, 1 internal lower pocket and one external pocket. Sizing starts from a medium and goes all the way to a 5X.
HV04
Preferred2
100% Polyester Birdseye mesh Durable lightweight performance wicking fabric Breathable & flexible segmented reflective tape Black bottom helps hide dirt 1 upper left chest pocket ANSI 107, Type R Class 2
HV62
Preferred2
High-density polyethylene (HDPE) shell with full brim to protect against sun exposure, rain, snow and dust. Unique '3D Adjustment' provides a precise helmet fit using harness depth settings. Evolution Wheel Ratchet is easy to use and creates a firm comfortable fit. 6-Point Suspension System Universal slots to fit various accessories Meets ANSI/ISEA Z89.1-2009, Type 1, Class E requirements Packed ready-to-wear with no assembly required Meets ANSI requirement for Reverse Donning and Lower Temperature
HH18
Preferred2
Meets ANSI Z89.1 Type II Class E, CSA Z94.1 Type II Class E requirements Fulfills Class E Electrical Insulation requirements Lightweight shell made with High Density Polyethylene (HDPE) EPS Liner for enhanced side, front and rear impact protection 4-point Nylon webbing suspension with SURE LOCK wheel ratchet adjustment for a secure and comfortable fit Felt-lined foam sweatband Compatible with 2 and 4 point chin strap Shell has a rain trough for extra convenience in inclement weather conditions Universal accessory slots accommodate a variety of eye, face and hearing protection products Made in Canada
HH28
Preferred2
Information, data and/or screens (the "Material") from this site may not be copied, duplicated, saved, archived or captured by any means except that the Material may be used as part of normal browser caching and printing performed in the course of using the site for its intended purpose.